Fatigue Rated Hydraulic Wedge Grips (±100 kN)
2743-401 | ±100 kN Fatigue Rated Hydraulic Wedge Grips 50mm Jaws
- Feature side-entry design with full access for easy specimen insertion from the side
- Adjustable specimen stops on flat faces provide accurate specimen centering
- Suitable for tension and compression including full reverse-stress dynamic testing capability
- Accepts 50mm wide Jaw Faces
- Temperature Range: +4C to +65C
- Static Load Capacity ±130kN (29 kip)
- Mechanical interface: M30 x 2 right hand female threads
- Dimensions: 219mm high x 200mm diameter
- Grip mass: 31 kg (68lbs) approximately per grip
Requires: Jaw faces, 207 Bar (3000psi) grip controller, and fatigue rated adapters Quantity: 2 grips
Capacity | ±100 kN (±22000 lbf ) |
---|---|
Static or Fatigue Rated | Fatigue |
Accessory Height | 219 mm (8.62 in ) |
Accessory Width | 200 mm (7.87 in ) |
Accessory Weight | 31 kg (68 lb ) |
Upper Fitting | M30 RH (Type If) |
Lower Fitting | M30 RH (Type If) |
Temperature Rating | +4 to +65 °C (+39 to +150 °F ) |
- 207 Bar (3000psi) Hydraulic Grip Controller and Manifold
- Jaw Faces for Flats (Serrated, 0 - 7.8 mm)
- Jaw Faces for Flats (Serrated, 7.1 - 15.7 mm)
- Jaw Faces for Flats (Carbide coated, 0 - 7.8 mm)
- Jaw Faces for Flats (Carbide coated, 7.1 - 15.7 mm)
- Jaw Faces for Rounds (Vee-serrated, 6.1 - 11.9 mm)
- Jaw Faces for Rounds (Vee-Serrated, 9.9 - 16.0 mm)
- Stand Alone Grip Controller and Hydraulic Power Supply - 207 Bar (3000 psi), Dual acting/Dual stage
100 kN Universal Hydraulic Wedge Action Grips (2743-401)
The Instron® 100 kN hydraulic wedge action grips may be used in static or dynamic materials testing applications. The interchangeable grip jaw faces accommodate both flat or round specimens. The grip design maintains a constant gripping force on the test specimen, regardless of the applied test forces. This controlled gripping force is applied by the grips as long as there is adequate hydraulic pressure supply that is active and connected.
- Produkte
- 3/21/2018
- 0.7 MB